Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1

    My AdKats 7.0.1.0 - Unable to trigger Auto-Nuke

    My friend set up an Auto-Nuke for me.

    My needs is all maps, Any team captures all flags, The backward ticket gap 500 Auto triggers a Nuke. (Do not trigger below 500)

    But my server seems to have no way to trigger an Auto-Nuke, How do I set it up?

    2018-09-05_220807.png

    Can you provide screenshots for my reference?

    Thank you for your help!
    Last edited by HATANO_KENJI; 05-09-2018 at 18:25.

  2. #2
    You have it set up to use the ticket loss rates for operation locker conquest. If you set it up to cover all the ticket loss rates for the mode you run then that will work.

    This system is not meant to handle more than one map, and definitely not more than one mode, but you might be able to make it work if you play with the numbers a bit.

    https://github.com/AdKats/AdKats#aut...to-nuke-system
    ____

  3. #3
    Change the 'nuke if winning team up by x tickets' setting to 500.

    Then change the settings off of locker conquest and make the ticket loss rate windows very high so they never trigger.

    You should be good then.
    ____

  4. #4
    This is my server, Team combination: US vs US
    http://battlelog.battlefield.com/bf4...-1b5317d9c610/

    I just don't want to use auto-surrender, So I want to use a reasonable auto-nuke, For me this is enough.

    2018-09-07_092322.png

    This is my latest setting, This can make sure that my server does not automatically trigger auto-surrender, and can be used in all Conquest Large maps?

    If you need to tell me the options for change, Please use the screenshot to tell me how to set what I need.

    Thank you for your help again.
    Last edited by HATANO_KENJI; 07-09-2018 at 09:22.

  5. #5
    Change 'maximum ticket count' to 100 less than your max ticket count.
    I suggest reducing your trigger count down from 10 to 2, this will give the nuke a 20 second delay instead of a 2 minute delay. Each trigger is 10 seconds, so requiring 10 triggers means it waits 100 seconds.
    I would also start with 20 second nukes instead of 25, and set the minimum duration between nukes to 120 seconds. You can make it more severe later if needed, but i suggest starting with 20 second nukes at 120 seconds between nukes for conquest.

    All the nuke settings are described here: https://github.com/AdKats/AdKats#b25-2-auto-settings
    ____

  6. #6
    We have the BF4 64 slots server again on Sep 30th, But I still don't know how to set it up.

    This is my current auto-nuke setting, Can you tell me which text needs to be changed? Because I really need this feature, Can you help me?

    Thank you!

    B25. Auto-Surrender Settings:
    Auto-Surrender Enable True
    Auto-Surrender Use Optimal Values for Metro Conquest False
    Auto-Surrender Use Optimal Values for Locker Conquest False
    Auto-Surrender Minimum Ticket Count 100
    Auto-Surrender Maximum Ticket Count 200
    Auto-Surrender Minimum Ticket Gap 50
    Auto-Surrender Losing Team Rate Window Max 500
    Auto-Surrender Losing Team Rate Window Min 500
    Auto-Surrender Winning Team Rate Window Max 999
    Auto-Surrender Winning Team Rate Window Min 999
    Auto-Surrender Trigger Count to Surrender 10
    Auto-Surrender Reset Trigger Count on Cancel True
    Auto-Surrender Minimum Player 32
    Nuke Winning Team Instead of Surrendering Losing Team True
    Start Surrender Vote Instead of Surrendering Losing Team False

    B25-2. Auto Settings:
    Maximum Auto-Nukes Each Round 4
    Reset Auto-Nuke Trigger Count on Fire True
    Switch to surrender after max nukes False
    Minimum Seconds Between Nukes 60
    Countdown Duration before a Nuke is fired 0
    Fire Nuke Triggers if Winning Team up by X Tickets 500
    Announce Nuke Preparation to Players True
    Allow Auto-Nuke to fire on losing teams False
    Auto-Nuke High Pop Duration Seconds 25
    Auto-Nuke Medium Pop Duration Seconds 25
    Auto-Nuke Low Pop Duration Seconds 25
    Auto-Nuke Consecutive Duration Increase 0
    Auto-Nuke Duration Increase Minimum Ticket Difference 100
    Auto-Nuke Message Nuking %WinnerName% for baserape!

    Screenshot:
    https://i.imgur.com/cTQ82h9.png
    https://i.imgur.com/ciSlRU0.png
    Last edited by HATANO_KENJI; 10-10-2018 at 16:31.

  7. #7
    As i mentioned above:
    "Change 'maximum ticket count' to 100 less than your max ticket count. "
    You have it set to 200 right now. This means it will only fire nuke triggers when both teams are between 100 and 200 tickets, i don't think that's what you want.
    ____

  8. #8
    Do you mean this?
    Auto-Surrender Maximum Ticket Count 100

    If so, I have updated.

    Because I can only search and replace by the same keyword.

    If it causes your troubles, please forgive me!

    Can my current settings meet my needs?

  9. #9
    Quote Originally Posted by HATANO_KENJI View Post
    Do you mean this?
    Auto-Surrender Maximum Ticket Count 100

    If so, I have updated.

    Because I can only search and replace by the same keyword.

    If it causes your troubles, please forgive me!

    Can my current settings meet my needs?
    No. 100 LESS than your maximum.

    If you have 1000 tickets total, make it 900. If you have 2000 tickets total, make it 1900. etc.
    ____

  10. #10
    I'm sorry, I can only try to use Google Translate to understand English.

    But if i want to change my settings in PRoCon, I will need to mimic the settings like the keywords I provided above.

    If need to change other options, I really can only make a request your log in to my PRoCon server to help with the change.

    It’s too difficult for me because of English.

    PS. My current total ticket is: 2000

    Can you help me set it?

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •